Product Description
Product Description
SUCFB full stainless steel housing pillow block bearings SUCFB201 SUCFB202 SUCFB203 SUCFB204 SUCFB205 SUCFB206 SUCFB207 SUCFB208
Product categories of UCP Pillow Block Units, we are specialized manufacturers from China, Ucp Pillow Block Units, Ucp Series Pillow Block Bearing suppliers/factory, wholesale high-quality products of Ucp Series Mounted Bearing R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Stainless Steel and Cast Iron Housing Pillow Block Bearing: Pillow Block Bearing is a bearing unit combined roller bearing and housing together. Most of the outer spherical bearings are made outer diameter sphere, installation and imported bearing bore together with a spherical structure forms, versatility and interchangeability. Meanwhile, in the design of such bearings also have some adjustable mind, it’s easy to install, the sealing device has a dual structure, it can work in harsh environments.
Bearing Housing is generally used cast molding. Common housing shapes: P, F, FS, FC, FL, T, PA, PL.
Maintenance:
Clean the bearing will be removed check, use methods such as taking pictures first record appearance. In addition, to confess the residual amount of lubricant and lubricant sampling, and then clean the bearing. Examination and distinguish can remove the bearings from scratch using, check on the accuracy for the standard, rotating accuracy, internal clearance and collaboration, raceway surface, insist on frame and seal rings etc. About the inspection effect that can be used by bearing or known bearing. Sentenced to standard according to the mechanical function and importance as well as other inspection cycle, etc. If you have the following injury, bearing shall not be applied from scratch, it is necessary to exchange.
Pillow block bearing NMN bearing factory auto bearing
1. Bearing Factory more than 20 years
2. Own brand :NMN bearing
3. OEM Accepted.
4.ISO9001 ISO14001
Pillow block bearing Specification
1.Pillow block bearing is a bearing unit which combine olling bearing and housing together.Most of the outer spherical bearings are made of the diameter sphere,and with a ball bearing inner hole are arranged together,various structure form-kind,good versatility and interchange ability.
2.Types of Pillow Block Bearing
SERIES: UCP UCF UCFB UCFA UCK UCT UCFL UCFL UCFC UCFU UELP UELK UKP UKF UKFL NAP NAFC NAFU NAFL NAFLU UCPH UCPA ……
Types available: UC series, UCP series, UCF series, UCFC series, UCFL series, UCT series
1) Radial insert ball bearings are particularly easy to fit. They are located on the shaft by means
of an eccentric locking collar, grub screws in the inner ring, an adapter sleeve, drive slot or fit.
2) The radial insert ball bearings are integrated in the housing units. In order to ensure correct
3)function and operational reliability in all operating conditions,
the bearing and housing are matched to each other.
4) Housing materials: cast iron pillow blocks / cast iron plummer blocks /
sheet steel housings / plastic housings / stainless steel housings
Our Products
Our main products include:
1, Miniature Bearings: like 608, 609, 625, 626, 693, 695, etc; 2, Deep Groove Ball Bearings: like 6000, 6200, 6300, 6800, 6900, 16000 Series; 3,Non-Standard Bearings: U grooved bearings, V grooved bearings, double grooved bearings, bearing rollers with or without plastic injection. 4,Pillow Block Bearing: UCP/ UCF/ UCFL; 5,Tapered Roller Bearings 6,Linear Motion Bearings
Company Profile
ZheJiang CZPT Bearing Group is a professional bearing manufacturer and exporter in China. We have been engaged in bearing industry for 20 years. Our company is specialized in producing Deep Groove Ball Bearings, Tapered Roller Bearings, Spherical Roller Bearings and Special Bearings in accordance with Customers’ designs.Our bearings has been widely applied into agricultural equipments, home appliances, power equipments, machine tools, automotives and engineering machinery, etc.
Processing Process
Packaging & Shipping
1 Plastic bag + Paper carton+ pallet 2.Single Box + Plastic rolling packing + Plastic bag + Paper carton+pallet
Our Activities
FAQ
Q: Are you trading company or manufacturer ?
A: We are facFtory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How to proceed an order for the bearings?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Contact Us
Jane
ZheJiang CZPT Bearing Co., Ltd.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Aligning: | Non-Aligning Bearing |
|---|---|
| Separated: | Unseparated |
| Feature: | Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed |
| Samples: |
US$ 0.9/Set
1 Set(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do UCP bearings handle misalignment?
UCP bearings, also known as pillow block bearings, are designed to handle certain degrees of misalignment between the shaft and the bearing housing. Here’s a detailed explanation of how UCP bearings handle misalignment:
1. Self-Aligning Capability: UCP bearings are often designed with self-aligning features that allow them to accommodate misalignment. This means that the bearing has some flexibility to adjust and adapt to slight angular errors or misalignments between the shaft and the housing. The self-aligning capability helps prevent excessive stress and uneven loading on the bearing, which can lead to premature wear or failure.
2. Spherical Outer Rings: Many UCP bearings incorporate spherical outer rings, which can tilt or swivel within the bearing housing. This spherical design allows the bearing to align itself with the misaligned shaft, compensating for angular errors. The spherical outer ring can rotate and pivot to some extent, reducing the axial and radial forces caused by misalignment and ensuring a more uniform distribution of loads on the bearing.
3. Ball-and-Socket Configuration: Some UCP bearings utilize a ball-and-socket configuration, where the inner ring of the bearing has a convex shape that fits into a corresponding concave shape in the housing. This configuration provides additional flexibility and misalignment compensation. The ball-and-socket design allows the bearing to accommodate misalignment in multiple directions, providing improved performance in applications where misalignment is prevalent.
4. Flexible Mounting Options: UCP bearings offer flexible mounting options that facilitate misalignment compensation. The bearing housing typically has multiple holes or slots for attachment to the equipment or structure. This allows for slight adjustments and repositioning of the bearing during installation, helping to correct minor misalignment between the shaft and the housing.
While UCP bearings can handle certain degrees of misalignment, it’s important to note that excessive or prolonged misalignment can still negatively impact bearing performance and lifespan. The self-aligning features of UCP bearings are intended to compensate for minor misalignments that can occur during operation, but they are not a substitute for proper alignment during installation.
Proper installation and alignment of UCP bearings are essential to maximize their misalignment-handling capabilities. It’s recommended to follow the manufacturer’s guidelines for alignment procedures, including checking and adjusting the shaft and housing alignment using appropriate measurement tools. Correct alignment helps minimize stress, reduce friction, and promote even load distribution, contributing to improved bearing performance and longevity.
If significant misalignment is anticipated in an application, it may be necessary to consider specialized bearing designs, such as spherical roller bearings or self-aligning ball bearings, which are specifically engineered to handle higher degrees of misalignment.
What is the price range for UCP bearings?
The price range for UCP bearings, also known as pillow block bearings, can vary depending on several factors, including the manufacturer, quality, size, material, and specific features of the bearing. Here’s a detailed explanation of the factors that influence the price range of UCP bearings:
- Manufacturer: Different manufacturers may offer UCP bearings at varying price points based on their brand reputation, manufacturing processes, and market positioning. Established and well-known bearing manufacturers often command higher prices compared to lesser-known or generic brands.
- Quality and Performance: UCP bearings that are manufactured to higher quality standards and offer superior performance characteristics may be priced higher than lower-quality alternatives. Factors such as precision, load capacity, speed rating, and durability can influence the price of the bearing.
- Size and Bore Diameter: The physical size and bore diameter of the UCP bearing can affect its price. Larger bearings or those with larger bore diameters generally require more materials and manufacturing processes, which can result in higher pricing compared to smaller bearings.
- Material: The material used for the bearing housing and the bearing insert can impact the price. UCP bearings made from materials such as cast iron, ductile iron, stainless steel, or ceramic may have different price ranges due to variations in material costs and manufacturing complexity.
- Features and Options: UCP bearings may come with additional features or options that can influence the price. These features can include specialized seals, coatings, lubrication systems, or self-aligning capabilities. Bearings with more advanced features or options may be priced higher than basic models.
Due to the various factors mentioned above, the price range for UCP bearings can vary significantly. As an estimate, the price for UCP bearings can range from a few dollars for smaller, basic models to several hundred dollars for larger, high-performance bearings with advanced features. It’s important to consider the specific requirements of your application and balance them with the available budget when selecting UCP bearings.
To get accurate and up-to-date pricing information, it’s recommended to consult with bearing suppliers, distributors, or manufacturers. They can provide you with specific pricing details based on the desired UCP bearing specifications, quantities, and any additional requirements you may have.
Keep in mind that the prices mentioned above are for general reference only, and actual prices may vary depending on the market conditions, geographical location, and other factors at the time of purchase.
How to install a UCP bearing?
Installing a UCP bearing, also known as a pillow block bearing, requires careful attention to ensure proper alignment and secure attachment. Here’s a detailed explanation of the steps involved in installing a UCP bearing:
- Gather the necessary tools: Before starting the installation process, gather the tools you’ll need, including a wrench or socket set, a torque wrench (if applicable), a hammer or mallet, and any additional tools specified by the bearing manufacturer.
- Prepare the mounting surface: Ensure the mounting surface is clean, flat, and free of any debris or contaminants. If necessary, use a cleaning agent and a cloth to remove dirt or grease from the surface. This will provide a stable foundation for the UCP bearing.
- Inspect the bearing and housing: Before installation, inspect the UCP bearing and the housing for any damage or defects. Check for smooth rotation of the bearing and ensure the housing is free from cracks or deformations. If any issues are found, replace the bearing or housing before proceeding with the installation.
- Apply lubrication: Depending on the bearing type and manufacturer’s recommendations, apply a suitable lubricant to the bearing’s inner race or rolling elements. This will help reduce friction and ensure smooth operation.
- Position the bearing: Place the UCP bearing into the housing, ensuring it is properly aligned. The bearing should fit snugly into the housing, with the mounting holes aligned. Take care not to damage the bearing or housing during this step.
- Secure the bearing: Once the bearing is properly positioned, use the provided fasteners (typically bolts or set screws) to secure the bearing to the mounting surface. Tighten the fasteners gradually and evenly, following the manufacturer’s recommended torque specifications. Avoid over-tightening, as it can damage the bearing or cause excessive friction.
- Check alignment: After securing the UCP bearing, check its alignment with the connected shaft or other components. Ensure that the bearing is aligned properly to prevent excessive loads or misalignment issues. Make any necessary adjustments to achieve proper alignment.
- Verify smooth rotation: Rotate the connected shaft or components to verify that the UCP bearing allows smooth and unhindered motion. Ensure there are no abnormal noises, sticking, or binding. If any issues are detected, recheck the installation or consult the bearing manufacturer for guidance.
- Final checks: Once the UCP bearing is installed, perform a final inspection to ensure everything is secure and in the correct position. Double-check the tightness of the fasteners and verify that there is no excessive play or movement in the bearing assembly.
It’s important to note that the above steps provide a general guideline for installing UCP bearings. The specific installation process may vary depending on the bearing manufacturer’s instructions and any unique requirements of your application. Always refer to the manufacturer’s documentation and guidelines for the most accurate and detailed installation instructions.
In summary, installing a UCP bearing involves preparing the mounting surface, inspecting the bearing and housing, applying lubrication, positioning and securing the bearing, checking alignment, verifying smooth rotation, and conducting final checks to ensure a proper installation.
editor by CX 2024-01-09