Product Description
Product Description
Pillow Block Bearing series with Pillow Block Bearing
Spherical bearing with seat is a bearing unit which combines rolling bearing with bearing seat. Most of the outer spherical bearings are made of spherical outer diameter, and are installed together with the bearing seat with a spherical inner hole, and the structure is diverse, and the versatility and interchangeability are good.
At the same time, This kind of bearing also has a certain aligning in design, is easy to install, has a dual-structure sealing device, and can work in harsh environments. Bearing seat is generally cast molding. Common seats are vertical seat (P), square seat (F), convex square seat (FS), convex round seat (FC), CZPT seat (FL), ring seat (C), slider seat (T)
Outer Spherical Surface Bearing/Insert Bearing/Pillow Block Bearing/Bearing With Housing
1, With Automatic Adjustment Function
The outer diameter of the bearing and the inner diameter of the bearing seat are spherical matches, and there is an automatic aligning function between the two, which can compensate for the axis non-coincidence caused by the installation error and the deformation of the installation bottom surface.
2. Large Load Capacity
Because the internal structure of the outer spherical ball bearing is the same as that of the 6200 and 6300 series deep groove ball bearings, the outer spherical ball bearing with the FS seat can not only bear the radial load, but also bear a certain axial load. At the same time bearing working noise is small.
3, Long Service Life
Spherical ball bearings with seat are usually used in harsh working environments such as dirt, dust, humidity and high temperature, and the grease inside the bearing will deteriorate in the short term. Therefore, it is necessary to grease and re-lubricate the outer spherical ball bearings with seats at appropriate intervals, and replace the deteriorated grease with fresh grease. FS with cast iron outer spherical ball bearings are equipped with oil nozzles, which can be re-lubricated to ensure perfect performance and long service life in any working environment.
The grease can be used at normal temperature, low temperature and high temperature according to the different ambient temperature. The bearing outer ring is equipped with oil groove to better ensure that the grease can be smoothly injected into the bearing from the oil nozzle.
4, Good Sealing Performance
Both sides of the outer spherical ball bearing are equipped with heat-resistant, oil-proof rubber sealing ring and steel dust cover combination seal. The dust cover is assembled on the outer diameter of the bearing inner ring and rotates together with the inner ring, which can effectively prevent external foreign matter from entering the bearing inside and resist external pressure to protect the bearing. The combination seal composed of the sealing ring and the dust cover can prevent soil, dust and water from entering the bearing inside and prevent the grease inside the bearing from leaking. The bearing can maintain perfect working performance in harsh working environment.
5, Strong Bearing Seat
Bearing seat is a whole seat structure, bearing seat rigidity is very good, to prevent bearing deformation during assembly, bearing seat is durable under any working conditions. Bearing seat can be made of gray cast iron, ductile cast iron and cast steel and other materials.
6, The Bearing Can Be Easily Locked on The Shaft
There are 4 ways to lock the bearing on the shaft, the common method is to lock the extended end of the inner ring and other 2 setting screws, you can also use the locking sleeve, locking sleeve or eccentric sleeve locking. These 4 methods can easily lock the bearing to the shaft.
Pillow Block Bearing/Spherical Bearing/Insert Bearing/, UC UCP Ucf UCFL Ucfa Ucfb Ucfc Ucfk Uel Ue SA Sb Series Farm Tractor Agricultural Machinery Bearing
Detailed Photos
Product Parameters
We Will Check All The Quality Before We Deliver The Goods To The Customer.
Packaging & Shipping
Why Is Logistics Important?
• Create Added Value: Logistics Can Help Retailers Create Added Value By Ensuring They Can Deliver The Right Quality And Quantity Of Products To Their Customers. Logistics Means You Can Manage Your Entire Business More Efficiently.
•Increasing Efficiency: As Global Trade Becomes More Popular, Logistics Is Becoming An Important Part Of The Supply Chain, Reducing Costs Through Effective Collaboration With Other Businesses And Suppliers.
•Cost Savings: If You Have A Well-Managed Logistics Strategy, You Reduce The Risk That Something Will Go Wrong And Cause You To Spend Extra Money.
• Provide A Better Customer Experience: Logistics Ensures That Customers Get The Items They Want At The Quality They Expect. By Better Organizing Logistics, Businesses Can Respond Quickly To Customer Needs.
• Enhance Brand Reputation: Logistics Shows That Your Business Processes Have Been Properly Addressed, So You Can Deliver The Amazing Results Your Customers Expect. The Result Is Usually A Better Brand Image And More Sales.
We Have A Professional Logistics Company For Transportation, To Ensure That The Goods Can Be Delivered On Time And Safely
Company Profile
HangZhou Chaokun Bearing Co., Ltd. Is A Research And Development Production And Sales In One Physical Factory,
The Main Products
• Deep Groove Ball Bearings
• Aligning Ball Bearings
• Cylindrical Roller Bearings
• Self-Aligning Roller Bearings
• Outer Spherical Bearings
• Angular Contact Bearings
• Thrust Ball Bearings
• Thrust Roller Bearings
Our Advantages
Our advantage
1. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge.
2. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
3. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the
customer’s requirements and needs.
4. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
FAQ
OEM policy
1. We can print your brand (logo, artwork) on the shield or laser engraving your brand on the shield.
2. We can customize your packaging according to your design
3. All copyright belongs to the customer, we promise not to disclose any information.
What Is The Minimum Order?
•Depending on the model, you can send me information for your calculati.
Are You Factory Or Trade Compay?
We Are Manufacturer/Factory & Trading Company,we have been engaged in bearing development and manufacturing industry for more than years.
How Long Is The Delivery Time?
It Depends On The Model And Quantity, Usually Within 15 Days.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Aligning: | Non-Aligning Bearing |
|---|---|
| Rows Number: | Single |
| Load Direction: | Radial Bearing |
| Material: | Chrome Steel&Stainless Steel |
| Product Name: | Pillow Block Bearing/Insert Bearing |
| Product Characteristics: | Long Service Life, Iarge Load Capacity |
| Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to identify the size and specifications of a UCP bearing?
Identifying the size and specifications of a UCP bearing, also known as a pillow block bearing, requires examining various parameters and markings on the bearing itself or referring to manufacturer documentation. Here’s a detailed explanation of how to identify the size and specifications of a UCP bearing:
1. Bearing Markings: Start by inspecting the bearing for any markings or labels that provide information about its size, type, and specifications. Common markings may include the manufacturer’s logo or name, bearing model or part number, and any relevant standards or certifications. These markings can help identify the specific UCP bearing and provide a starting point for gathering further information.
2. Dimensions: Determine the dimensions of the UCP bearing, including the bore diameter (inner diameter), outer diameter, and overall width. These dimensions are typically specified in millimeters (mm) or inches (in). Measuring the bearing with calipers or using a ruler can help determine its size. Alternatively, the dimensions can be obtained from manufacturer catalogs, datasheets, or online resources.
3. Pillow Block Type: UCP bearings come in various pillow block types, such as UCP200 series or UCP300 series, which indicate different design variations and size ranges. The pillow block type is often indicated in the bearing model or part number. Identifying the specific series or type helps in selecting compatible components and determining the bearing’s load capacity and performance characteristics.
4. Load Capacity and Ratings: The load capacity and ratings of a UCP bearing are crucial specifications to consider for proper application. They indicate the maximum allowable radial and axial loads that the bearing can withstand. Load capacity information is typically provided by the manufacturer and can be found in bearing catalogs or technical documentation. It is important to ensure that the bearing’s load capacity meets the requirements of the application to prevent premature failure.
5. Lubrication: Determine the lubrication requirements of the UCP bearing. This includes identifying the recommended lubricant type, such as grease or oil, as well as the appropriate amount and frequency of lubrication. Lubrication information is often provided by the manufacturer and can be found in bearing documentation or technical specifications.
6. Sealing and Shielding: Check if the UCP bearing has any seals or shields to protect against contamination and retain lubrication. The type of seal or shield used can impact the bearing’s performance in different environments. Common seal types include rubber seals, metal shields, or labyrinth seals. The sealing arrangement may be indicated in the bearing model or part number, or it can be obtained from manufacturer documentation.
7. Manufacturer Documentation: Consult the manufacturer’s documentation, such as catalogs, datasheets, or technical manuals, for detailed information about the UCP bearing’s size, specifications, and performance characteristics. Manufacturer resources provide comprehensive information and ensure accurate identification of the bearing.
It’s important to note that the identification process may vary depending on the manufacturer and specific bearing model. If you encounter difficulties or require precise information, contacting the bearing manufacturer, distributor, or a knowledgeable expert in the field can provide further guidance and assistance in identifying the size and specifications of a UCP bearing.
Taking accurate measurements, referring to bearing markings, and utilizing manufacturer resources are key steps in correctly identifying and selecting the appropriate UCP bearing for a given application.
What materials are UCP bearings made of?
UCP bearings, also known as pillow block bearings, are manufactured using various materials to meet specific performance requirements and application needs. The materials used for UCP bearings include:
- Bearing Housing: The bearing housing, which provides the outer structure and support for the bearing, is typically made of materials such as cast iron, ductile iron, or cast steel. These materials offer excellent strength, rigidity, and durability, making them suitable for handling heavy loads and withstanding demanding operating conditions.
- Bearing Insert: The bearing insert, also known as the inner ring or the rolling element, is made of different materials depending on the application requirements. Common materials used for bearing inserts include:
- Chrome Steel: Chrome steel, also known as bearing steel, is a widely used material for bearing inserts. It offers good hardness, toughness, and wear resistance, making it suitable for a broad range of applications.
- Stainless Steel: Stainless steel bearing inserts are used when corrosion resistance is a priority. Stainless steel offers excellent resistance to moisture, chemicals, and other corrosive substances, making it suitable for applications in harsh or corrosive environments.
- Ceramic: Ceramic bearing inserts, typically made of materials such as silicon nitride or zirconia, are used in specialized applications that require high-speed operation, extreme temperature resistance, or electrical insulation properties. Ceramic inserts offer low friction, high stiffness, and resistance to wear and corrosion.
- Thermoplastic: Thermoplastic bearing inserts, often made of materials like polyamide or PBT (polybutylene terephthalate), are used in applications where lightweight, chemical resistance, or low noise operation is required. Thermoplastic inserts can offer good load-bearing capacity and self-lubricating properties.
The specific material selection for UCP bearings depends on factors such as load capacity, operating conditions, environmental factors, and cost considerations. It’s important to consult the manufacturer’s documentation or specifications for the specific material options available for a particular UCP bearing model.
In summary, UCP bearings are typically made of materials such as cast iron, ductile iron, or cast steel for the housing, while the bearing insert can be made of materials like chrome steel, stainless steel, ceramic, or thermoplastic. The choice of materials depends on the specific application requirements and the desired performance characteristics.
What is a UCP bearing?
A UCP bearing, also known as a pillow block bearing, is a type of mounted bearing commonly used in various industrial applications. It is designed to provide support and facilitate rotational or linear motion in machinery and equipment. Here’s a detailed explanation:
A UCP bearing consists of a bearing unit and a housing. The bearing unit typically includes a rolling element bearing, such as a ball bearing or a roller bearing, which enables smooth and low-friction motion. The housing, often made of cast iron or pressed steel, serves as a support structure for the bearing unit and provides protection against contaminants and external elements.
The term “UCP” stands for “Unit with Cast Iron Pillow Block,” referring to the common use of cast iron housings in UCP bearings. The housing is typically shaped like a pillow or block, with a flat base and mounting holes for easy installation and attachment to a machine or structure.
UCP bearings are widely used in various applications, including conveyor systems, agricultural machinery, industrial equipment, HVAC systems, and more. They offer several advantages:
- Easy Installation: UCP bearings are designed for easy installation and mounting. The housing’s flat base and pre-drilled mounting holes allow for straightforward attachment to a support structure or machine.
- Simple Maintenance: UCP bearings are relatively easy to maintain. They often feature removable bearing units, allowing for inspection, lubrication, and replacement when necessary. This simplifies maintenance tasks and reduces downtime.
- Load Support: UCP bearings are capable of supporting different loads, including radial and axial loads. The specific load capacity depends on the type and size of the bearing unit used within the UCP assembly.
- Protection and Contamination Resistance: The housing of a UCP bearing provides protection to the bearing unit against contaminants, moisture, and other external elements. This helps extend the bearing’s service life and maintain its performance.
- Alignment Compensation: UCP bearings often have self-aligning capabilities, allowing them to compensate for minor misalignments between the shaft and the housing. This feature helps reduce stress and wear on the bearing, enhancing its reliability and longevity.
UCP bearings are available in various sizes, configurations, and bearing types to accommodate different application requirements. It is important to select the appropriate UCP bearing based on factors such as load capacity, operating conditions, and environmental considerations.
In summary, a UCP bearing, or pillow block bearing, is a mounted bearing unit that provides support and facilitates motion in industrial applications. With their easy installation, maintenance convenience, load support, protection, and alignment compensation features, UCP bearings are widely used to ensure reliable and efficient operation of machinery and equipment.
editor by CX 2024-02-12